pub struct Argon2 {
pub m_cost: u32,
pub t_cost: u32,
pub p_cost: u32,
}Expand description
Password hashing cost
Sets the Argon2id cost used whenever a password is hashed. Existing hashes keep the cost they were created with until that password is next set, so a change takes effect gradually. The defaults follow the OWASP recommendation.
Tips:
- Startup and reload refuse a combination Argon2 rejects, such as
m_costbelow eight blocks per lane ofp_cost, and warn when the cost falls below the weakest OWASP pair listed underm_cost.
Fields§
§m_cost: u32Sets the Argon2id working-buffer size for hashing a new password, in 1 KiB blocks.
Each concurrent password operation retains roughly this much memory for its duration, with no concurrency bound. Stored hashes retain their parameters until the account’s password is next set.
Lowering this weakens resistance to parallel cracking hardware unless
authentication.argon2.t_cost compensates; equivalent-strength
(authentication.argon2.m_cost, authentication.argon2.t_cost) pairs
are (47104, 1), (19456, 2), (12288, 3), (9216, 4), and (7168, 5). The
default and these pairs follow the OWASP Argon2id
recommendation.
reloadable: yes default: 19456 legacy: argon2_m_cost
t_cost: u32Sets the number of Argon2id passes over its working buffer.
Raising this increases CPU cost without changing memory cost. See
authentication.argon2.m_cost for equivalent-strength parameter pairs.
reloadable: yes default: 2 legacy: argon2_t_cost
p_cost: u32Sets the number of lanes in an Argon2id working buffer.
Lanes are computed sequentially here, so raising this changes the hash
without adding parallelism. authentication.argon2.m_cost must be at
least eight times this value.
reloadable: yes default: 1 legacy: argon2_p_cost
Implementations§
Trait Implementations§
impl Copy for Argon2
Source§impl<'de> Deserialize<'de> for Argon2
impl<'de> Deserialize<'de> for Argon2
Source§fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>where
__D: Deserializer<'de>,
Auto Trait Implementations§
impl Freeze for Argon2
impl RefUnwindSafe for Argon2
impl Send for Argon2
impl Sync for Argon2
impl Unpin for Argon2
impl UnsafeUnpin for Argon2
impl UnwindSafe for Argon2
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> DeserializeOwned for Twhere
T: for<'de> Deserialize<'de>,
Source§impl<T> ExpectInto for T
impl<T> ExpectInto for T
Source§impl<T> Expected for T
impl<T> Expected for T
Source§fn expected_add(self, rhs: Self) -> Selfwhere
Self: CheckedAdd + Sized,
fn expected_add(self, rhs: Self) -> Selfwhere
Self: CheckedAdd + Sized,
rhs with an expectation that the operation is valid. Read moreSource§fn expected_sub(self, rhs: Self) -> Selfwhere
Self: CheckedSub + Sized,
fn expected_sub(self, rhs: Self) -> Selfwhere
Self: CheckedSub + Sized,
rhs with an expectation that the operation is valid. Read moreSource§fn expected_mul(self, rhs: Self) -> Selfwhere
Self: CheckedMul + Sized,
fn expected_mul(self, rhs: Self) -> Selfwhere
Self: CheckedMul + Sized,
rhs with an expectation that the operation is valid. Read moreSource§fn expected_div(self, rhs: Self) -> Selfwhere
Self: CheckedDiv + Sized,
fn expected_div(self, rhs: Self) -> Selfwhere
Self: CheckedDiv + Sized,
rhs with an expectation that the operation is valid. Read moreSource§fn expected_rem(self, rhs: Self) -> Selfwhere
Self: CheckedRem + Sized,
fn expected_rem(self, rhs: Self) -> Selfwhere
Self: CheckedRem + Sized,
§impl<T> Identity for Twhere
T: ?Sized,
impl<T> Identity for Twhere
T: ?Sized,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
fn instrument(self, span: Span) -> Instrumented<Self> ⓘ
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreimpl<T> JsonCastable<CanonicalJsonValue> for T
impl<T> JsonCastable<Value> for T
§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);§impl<T> PolicyExt for Twhere
T: ?Sized,
impl<T> PolicyExt for Twhere
T: ?Sized,
§impl<T> ServiceExt for T
impl<T> ServiceExt for T
§fn add_extension<T>(self, value: T) -> AddExtension<Self, T>where
Self: Sized,
fn add_extension<T>(self, value: T) -> AddExtension<Self, T>where
Self: Sized,
§fn compression(self) -> Compression<Self>where
Self: Sized,
fn compression(self) -> Compression<Self>where
Self: Sized,
§fn decompression(self) -> Decompression<Self>where
Self: Sized,
fn decompression(self) -> Decompression<Self>where
Self: Sized,
§fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>where
Self: Sized,
fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>where
Self: Sized,
§fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>where
Self: Sized,
fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>where
Self: Sized,
§fn follow_redirects(self) -> FollowRedirect<Self>where
Self: Sized,
fn follow_redirects(self) -> FollowRedirect<Self>where
Self: Sized,
§fn sensitive_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>where
Self: Sized,
fn sensitive_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>where
Self: Sized,
§fn sensitive_request_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<Self>where
Self: Sized,
fn sensitive_request_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveRequestHeaders<Self>where
Self: Sized,
§fn sensitive_response_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveResponseHeaders<Self>where
Self: Sized,
fn sensitive_response_headers(
self,
headers: impl IntoIterator<Item = HeaderName>,
) -> SetSensitiveResponseHeaders<Self>where
Self: Sized,
§fn override_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn override_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
§fn append_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn append_request_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
§fn insert_request_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
fn insert_request_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetRequestHeader<Self, M>where
Self: Sized,
§fn override_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn override_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
§fn append_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn append_response_header<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
§fn insert_response_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
fn insert_response_header_if_not_present<M>(
self,
header_name: HeaderName,
make: M,
) -> SetResponseHeader<Self, M>where
Self: Sized,
§fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>where
Self: Sized,
fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>where
Self: Sized,
500 Internal Server responses. Read moreSource§impl<T> Tried for T
impl<T> Tried for T
Source§fn try_add(self, rhs: Self) -> Result<Self>where
Self: CheckedAdd + Sized,
fn try_add(self, rhs: Self) -> Result<Self>where
Self: CheckedAdd + Sized,
rhs with checked arithmetic. Read moreSource§fn try_sub(self, rhs: Self) -> Result<Self>where
Self: CheckedSub + Sized,
fn try_sub(self, rhs: Self) -> Result<Self>where
Self: CheckedSub + Sized,
rhs with checked arithmetic. Read moreSource§fn try_mul(self, rhs: Self) -> Result<Self>where
Self: CheckedMul + Sized,
fn try_mul(self, rhs: Self) -> Result<Self>where
Self: CheckedMul + Sized,
rhs with checked arithmetic. Read more