Skip to main content

Pool

Struct Pool 

Source
pub struct Pool {
    pub affinity: bool,
    pub workers: usize,
    pub workers_limit: usize,
    pub max_workers: usize,
    pub queue_mult: usize,
}
Expand description

Database worker pool

The threads that execute database reads and writes, and the queues that feed them. Sizes are derived when the database opens, from the CPU count and, where it can be detected, the queue layout of the storage device under database_path. Changes need a restart.

Tips:

  • Under a cgroup task (pids) limit, as in many containers, startup warns when the pool may exceed it; raise the limit or lower max_workers.
  • [global.runtime.stream] scales its concurrency from this pool.

Fields§

§affinity: bool

Pins database pool workers to the CPU cores that share their storage queue.

It has no effect unless tuwunel was built with the cpu_affinity feature.

default: true legacy: db_pool_affinity

§workers: usize

Sets the number of database frontend pool worker threads.

Match the system I/O capabilities, such as queue depth or simultaneous requests in flight. The default is four times the available CPU thread count, clamped from 32 through 1024. This setting applies only when database.pool.affinity is disabled or unavailable; otherwise the worker count is determined automatically.

default: varies by system legacy: db_pool_workers

§workers_limit: usize

Limits each automatically detected database worker group.

When database.pool.affinity is enabled and available, this value is multiplied by the number of CPU cores sharing a device queue because workers can run on any of those cores. The limit prevents performance degradation when thread pooling cannot scale to the full capacity of high-end hardware.

default: 32 legacy: db_pool_workers_limit

§max_workers: usize

Limits the total number of workers across all database worker groups.

Worker counts are reduced when their sum exceeds this limit, but each populated group retains at least one worker, making the populated group count the effective floor. The default generally constrains larger systems with 16 or more cores. Thread pooling cannot reach full hardware capacity, but this limit can be raised on huge systems when groups are too small and scheduling overhead is not the bottleneck.

default: 2048 legacy: db_pool_max_workers

§queue_mult: usize

Sets the capacity multiplier for database frontend pool request queues.

Each queue capacity is this value multiplied by the pool worker count. Tokio tasks submitting requests yield when the queue is full, providing flow control that avoids buffer bloat. A value that is too low can inhibit throughput.

default: 4 legacy: db_pool_queue_mult

Implementations§

Source§

impl Pool

Source

pub(super) fn fmt_config(&self, out: &mut Formatter<'_>) -> Result

Trait Implementations§

Source§

impl Clone for Pool

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for Pool

Source§

impl Debug for Pool

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for Pool

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for Pool

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Display for Pool

Source§

fn fmt(&self, out: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

§

impl Freeze for Pool

§

impl RefUnwindSafe for Pool

§

impl Send for Pool

§

impl Sync for Pool

§

impl Unpin for Pool

§

impl UnsafeUnpin for Pool

§

impl UnwindSafe for Pool

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> DropFlavorWrapper<T> for T

§

type Flavor = MayDrop

The DropFlavor that [wrap]s T into Self
Source§

impl<T> ExpectInto for T

Source§

fn expect_into<Dst: TryFrom<Self>>(self) -> Dst
where Self: Sized,

Converts the value into Dst and returns the successful result. Read more
Source§

impl<T> Expected for T

Source§

fn expected_add(self, rhs: Self) -> Self
where Self: CheckedAdd + Sized,

Adds rhs with an expectation that the operation is valid. Read more
Source§

fn expected_sub(self, rhs: Self) -> Self
where Self: CheckedSub + Sized,

Subtracts rhs with an expectation that the operation is valid. Read more
Source§

fn expected_mul(self, rhs: Self) -> Self
where Self: CheckedMul + Sized,

Multiplies by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_div(self, rhs: Self) -> Self
where Self: CheckedDiv + Sized,

Divides by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_rem(self, rhs: Self) -> Self
where Self: CheckedRem + Sized,

Computes the remainder with an expectation that the operation is valid. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

§

const WITNESS: W = W::MAKE

A constant of the type witness
§

impl<T> Identity for T
where T: ?Sized,

§

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.
§

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> JsonCastable<CanonicalJsonValue> for T

§

impl<T> JsonCastable<Value> for T

§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1:

renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> ServiceExt for T

§

fn add_extension<T>(self, value: T) -> AddExtension<Self, T>
where Self: Sized,

Add some shareable value to request extensions. Read more
§

fn compression(self) -> Compression<Self>
where Self: Sized,

Compresses response bodies. Read more
§

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Decompress response bodies. Read more
§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
§

fn sensitive_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>
where Self: Sized,

Mark headers as sensitive on both requests and responses. Read more
§

fn sensitive_request_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<Self>
where Self: Sized,

Mark headers as sensitive on requests. Read more
§

fn sensitive_response_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveResponseHeaders<Self>
where Self: Sized,

Mark headers as sensitive on responses. Read more
§

fn override_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request. Read more
§

fn append_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Append a header into the request. Read more
§

fn insert_request_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request, if the header is not already present. Read more
§

fn override_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response. Read more
§

fn append_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Append a header into the response. Read more
§

fn insert_response_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response, if the header is not already present. Read more
§

fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>
where Self: Sized,

Catch panics and convert them into 500 Internal Server responses. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T> Tried for T

Source§

fn try_add(self, rhs: Self) -> Result<Self>
where Self: CheckedAdd + Sized,

Adds rhs with checked arithmetic. Read more
Source§

fn try_sub(self, rhs: Self) -> Result<Self>
where Self: CheckedSub + Sized,

Subtracts rhs with checked arithmetic. Read more
Source§

fn try_mul(self, rhs: Self) -> Result<Self>
where Self: CheckedMul + Sized,

Multiplies by rhs with checked arithmetic. Read more
Source§

fn try_div(self, rhs: Self) -> Result<Self>
where Self: CheckedDiv + Sized,

Divides by rhs with checked arithmetic. Read more
Source§

fn try_rem(self, rhs: Self) -> Result<Self>
where Self: CheckedRem + Sized,

Computes the remainder by rhs with checked arithmetic. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more