Skip to main content

Dns

Struct Dns 

Source
pub struct Dns {
Show 13 fields pub servers: Vec<String>, pub cache_entries: u32, pub min_ttl: u64, pub min_ttl_nxdomain: u64, pub attempts: u16, pub timeout: u64, pub tcp_fallback: bool, pub query_all_nameservers: bool, pub query_over_tcp_only: bool, pub ip_lookup_strategy: u8, pub passthru_domains: RegexSet, pub passthru_appservices: bool, pub case_randomization: bool,
}
Expand description

DNS resolver

The server resolves host names for its outbound HTTP requests with its own resolver rather than the system library. With servers empty it takes its nameservers from /etc/resolv.conf at startup. Answers are kept for at least min_ttl (min_ttl_nxdomain for missing domains) whatever their TTL.

Tips:

  • servers entries must be IP addresses with an optional port; a host name fails startup.
  • passthru_domains entries are regular expressions; a plain dotted name logs a startup warning because each dot matches any character.
  • Only passthru_domains applies on reload; other changes need a restart.

Fields§

§servers: Vec<String>

Selects custom DNS servers instead of the operating system resolvers.

A non-empty list prevents reading /etc/resolv.conf. Each entry is an IP address with an optional port, defaulting to 53. Servers are expected to support both UDP and TCP on that port; enable network.dns.query_over_tcp_only if any server supports only TCP.

example: [“127.0.0.53”, “1.1.1.1:5353”, “[fd00::1]:53”]

default: [] legacy: dns_servers

§cache_entries: u32

Sets the maximum DNS memory cache entries; increase cautiously because entry sizes vary, and decrease only with an external DNS cache, excluding systemd-resolved even when configured to cache.

default: 32768 legacy: dns_cache_entries

§min_ttl: u64

Sets the minimum DNS cache lifetime in seconds, intentionally high by default for federation with many servers whose domains have shorter TTLs; an external cache merely shifts this load to a cache unaware of the application’s needs, where honoring low TTLs can increase load.

default: 10800 legacy: dns_min_ttl

§min_ttl_nxdomain: u64

Sets the minimum cached NXDOMAIN lifetime in seconds, defaulting to three days because false negatives are very rare and efficient federation requires aggressively caching domains assumed not to return rather than repeatedly checking them.

default: 259200 legacy: dns_min_ttl_nxdomain

§attempts: u16

Sets the number of DNS nameserver retries after a timeout or error.

default: 10 legacy: dns_attempts

§timeout: u64

Sets the DNS response timeout in seconds; recursive queries to some domains can take several seconds, so avoid overly short timeouts, especially with slower hardware or resolvers.

default: 10 legacy: dns_timeout

§tcp_fallback: bool

Enables TCP fallback after DNS errors.

Disable this if the nameserver does not support it.

legacy: dns_tcp_fallback

§query_all_nameservers: bool

Enables querying all nameservers until the domain is found.

Hickory resolver calls this “trust_negative_responses”. It can avoid unnecessary queries when the first nameserver returns NXDOMAIN or an empty NOERROR response.

legacy: query_all_nameservers

§query_over_tcp_only: bool

Queries configured nameservers using only TCP instead of UDP, as some container deployments require (see DNS troubleshooting).

legacy: query_over_tcp_only

§ip_lookup_strategy: u8

Selects the DNS A/AAAA lookup strategy by number.

Use 1 (Ipv4Only) to query only A records with no AAAA/IPv6, or 2 (Ipv6Only) to query only AAAA records with no A/IPv4. Use 3 (Ipv4AndIpv6) to query both in parallel and accept the first successful response. Use 4 (Ipv6thenIpv4) to query AAAA then A on failure, or 5 (Ipv4thenIpv6) to query A then AAAA on failure. Without IPv6 networking, 1 can improve DNS performance because successful AAAA results cannot be used.

default: 5 legacy: ip_lookup_strategy

§passthru_domains: RegexSet

Selects domain patterns resolved through the alternative DNS path.

This path has no persistent cache, a very small memory cache, and no enforced TTL. It serves internal networks and application services that require those properties, and does not support federation or general use.

reloadable: yes example: [‘.dns.podman$’]

default: [] legacy: dns_passthru_domains

§passthru_appservices: bool

Resolves application services through the alternative DNS path; when all should match, prefer this to listing domains in network.dns.passthru_domains to avoid regex matching overhead and domain list maintenance.

legacy: dns_passthru_appservices

§case_randomization: bool

Randomizes DNS query case and requires matching answer case to mitigate spoofing; occasional logged errors usually indicate DNS overload, it can be disabled for servers lacking support, and the false default follows reports about popular DNS caches whose possible fixes may allow a future release to restore true.

legacy: dns_case_randomization

Implementations§

Source§

impl Dns

Source

pub(super) fn fmt_config(&self, out: &mut Formatter<'_>) -> Result

Trait Implementations§

Source§

impl Clone for Dns

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for Dns

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for Dns

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for Dns

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Display for Dns

Source§

fn fmt(&self, out: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

§

impl Freeze for Dns

§

impl RefUnwindSafe for Dns

§

impl Send for Dns

§

impl Sync for Dns

§

impl Unpin for Dns

§

impl UnsafeUnpin for Dns

§

impl UnwindSafe for Dns

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> DropFlavorWrapper<T> for T

§

type Flavor = MayDrop

The DropFlavor that [wrap]s T into Self
Source§

impl<T> ExpectInto for T

Source§

fn expect_into<Dst: TryFrom<Self>>(self) -> Dst
where Self: Sized,

Converts the value into Dst and returns the successful result. Read more
Source§

impl<T> Expected for T

Source§

fn expected_add(self, rhs: Self) -> Self
where Self: CheckedAdd + Sized,

Adds rhs with an expectation that the operation is valid. Read more
Source§

fn expected_sub(self, rhs: Self) -> Self
where Self: CheckedSub + Sized,

Subtracts rhs with an expectation that the operation is valid. Read more
Source§

fn expected_mul(self, rhs: Self) -> Self
where Self: CheckedMul + Sized,

Multiplies by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_div(self, rhs: Self) -> Self
where Self: CheckedDiv + Sized,

Divides by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_rem(self, rhs: Self) -> Self
where Self: CheckedRem + Sized,

Computes the remainder with an expectation that the operation is valid. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

§

const WITNESS: W = W::MAKE

A constant of the type witness
§

impl<T> Identity for T
where T: ?Sized,

§

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.
§

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> JsonCastable<CanonicalJsonValue> for T

§

impl<T> JsonCastable<Value> for T

§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1:

renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> ServiceExt for T

§

fn add_extension<T>(self, value: T) -> AddExtension<Self, T>
where Self: Sized,

Add some shareable value to request extensions. Read more
§

fn compression(self) -> Compression<Self>
where Self: Sized,

Compresses response bodies. Read more
§

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Decompress response bodies. Read more
§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
§

fn sensitive_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>
where Self: Sized,

Mark headers as sensitive on both requests and responses. Read more
§

fn sensitive_request_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<Self>
where Self: Sized,

Mark headers as sensitive on requests. Read more
§

fn sensitive_response_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveResponseHeaders<Self>
where Self: Sized,

Mark headers as sensitive on responses. Read more
§

fn override_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request. Read more
§

fn append_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Append a header into the request. Read more
§

fn insert_request_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request, if the header is not already present. Read more
§

fn override_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response. Read more
§

fn append_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Append a header into the response. Read more
§

fn insert_response_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response, if the header is not already present. Read more
§

fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>
where Self: Sized,

Catch panics and convert them into 500 Internal Server responses. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T> Tried for T

Source§

fn try_add(self, rhs: Self) -> Result<Self>
where Self: CheckedAdd + Sized,

Adds rhs with checked arithmetic. Read more
Source§

fn try_sub(self, rhs: Self) -> Result<Self>
where Self: CheckedSub + Sized,

Subtracts rhs with checked arithmetic. Read more
Source§

fn try_mul(self, rhs: Self) -> Result<Self>
where Self: CheckedMul + Sized,

Multiplies by rhs with checked arithmetic. Read more
Source§

fn try_div(self, rhs: Self) -> Result<Self>
where Self: CheckedDiv + Sized,

Divides by rhs with checked arithmetic. Read more
Source§

fn try_rem(self, rhs: Self) -> Result<Self>
where Self: CheckedRem + Sized,

Computes the remainder by rhs with checked arithmetic. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more