Skip to main content

Http

Struct Http 

Source
pub struct Http {
    pub max_response_size: usize,
    pub conn_timeout: u64,
    pub timeout: u64,
    pub total_timeout: u64,
    pub idle_timeout: u64,
    pub idle_per_host: u16,
    pub gzip: bool,
    pub brotli: bool,
    pub zstd: bool,
    pub ip_range_denylist: Vec<String>,
    pub allow_invalid_tls_certificates: bool,
}
Expand description

Outbound HTTP requests

Defaults for HTTP requests the server makes to other hosts: federation, remote media and URL previews, push gateways, appservices and identity providers. The server’s own listener is configured in [global.http] instead. Some clients override the timeouts here: [global.federation.transport], [global.sending], [global.appservice_client], [global.push] and [global.network.discovery].

Tips:

  • The default ip_range_denylist refuses private, loopback and link-local addresses, including a push gateway or URL preview target on your LAN. Remove just the range you need rather than emptying the list. Appservice requests are not checked against it.
  • An ip_range_denylist entry that is not a valid CIDR range fails startup.
  • Outbound proxies are set with proxy (the [global.proxy] table) or, while proxy stays "none", by the HTTP_PROXY, HTTPS_PROXY and ALL_PROXY environment variables.

Fields§

§max_response_size: usize

Limits the size of a response body buffered from a remote server.

This applies to federation requests, push gateway and appservice transactions, and remote media fetched for URL previews. Peers cannot be trusted to honor requested limits, so the local bound protects against a remote exhausting process memory. Accepts an integer byte count or a string with an SI/IEC suffix such as “256 MiB”.

default: “256 MiB” legacy: max_response_size

§conn_timeout: u64

Sets the default outbound HTTP connection timeout in seconds; individual clients may override it.

default: 10 legacy: request_conn_timeout

§timeout: u64

Sets the default outbound HTTP read timeout in seconds; individual clients may override it.

default: 35 legacy: request_timeout

§total_timeout: u64

Sets the default outbound HTTP whole-request timeout in seconds.

Keep it high enough for healthy requests while retaining a timeout backstop. Individual clients may override it.

default: 320 legacy: request_total_timeout

§idle_timeout: u64

Sets the default outbound HTTP idle connection pool timeout in seconds; individual clients may override it.

default: 5 legacy: request_idle_timeout

§idle_per_host: u16

Sets the default maximum idle outbound HTTP connections per host; individual clients may override it.

default: 1 legacy: request_idle_per_host

§gzip: bool

Allows outbound HTTP clients to negotiate gzip response compression.

Clients advertise gzip in Accept-Encoding and transparently decompress responses for federation, media, and URL preview traffic. This is separate from http.compression.gzip, which compresses tuwunel’s own responses. It is enabled by default; disabling it prevents both requesting and decompressing gzip. It has no effect unless tuwunel was built with the gzip_compression feature.

default: true legacy: request_gzip

§brotli: bool

Allows outbound HTTP clients to negotiate brotli response compression.

Clients advertise brotli in Accept-Encoding and transparently decompress responses for federation, media, and URL preview traffic. This is separate from http.compression.brotli, which compresses tuwunel’s own responses. It is enabled by default; disabling it prevents both requesting and decompressing brotli. It has no effect unless tuwunel was built with the brotli_compression feature.

default: true legacy: request_brotli

§zstd: bool

Allows outbound HTTP clients to negotiate zstd response compression.

Clients advertise zstd in Accept-Encoding and transparently decompress responses for federation, media, and URL preview traffic. This is separate from http.compression.zstd, which compresses tuwunel’s own responses. It is enabled by default; disabling it prevents both requesting and decompressing zstd. It has no effect unless tuwunel was built with the zstd_compression feature.

default: true legacy: request_zstd

§ip_range_denylist: Vec<String>

Blocks outbound requests to the listed IPv4 and IPv6 CIDR ranges.

Entries are quoted strings; the defaults cover RFC1918, unroutable, loopback, multicast, and testnet addresses for security, and an empty vector ([]) disables this filter. Application filtering can have bypasses, so enforce network boundaries with firewall zones rather than treating this as a guarantee.

Proxy endpoints selected through configuration or environment variables are exempt so private forward proxies remain reachable, while direct requests and locally resolving socks4 or socks5 proxies still filter destination addresses. HTTP(S) forward proxies and socks4a or socks5h resolve destinations remotely, so their egress policy must enforce destination network boundaries instead.

Defaults to: [“127.0.0.0/8”, “0.0.0.0/8”, “10.0.0.0/8”, “172.16.0.0/12”, “192.168.0.0/16”, “100.64.0.0/10”, “192.0.0.0/24”, “169.254.0.0/16”, “192.88.99.0/24”, “198.18.0.0/15”, “192.0.2.0/24”, “198.51.100.0/24”, “203.0.113.0/24”, “224.0.0.0/4”, “::1/128”, “::/128”, “fe80::/10”, “fc00::/7”, “2001:db8::/32”, “ff00::/8”, “fec0::/10”] legacy: ip_range_denylist

§allow_invalid_tls_certificates: bool

Disables TLS certificate validation.

This hidden setting affects all requests, including URL previews and federation. It is highly insecure and must not be used in production.

legacy: allow_invalid_tls_certificates

Implementations§

Source§

impl Http

Source

pub(super) fn fmt_config(&self, out: &mut Formatter<'_>) -> Result

Trait Implementations§

Source§

impl Clone for Http

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for Http

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for Http

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl<'de> Deserialize<'de> for Http

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Display for Http

Source§

fn fmt(&self, out: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

§

impl Freeze for Http

§

impl RefUnwindSafe for Http

§

impl Send for Http

§

impl Sync for Http

§

impl Unpin for Http

§

impl UnsafeUnpin for Http

§

impl UnwindSafe for Http

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

§

impl<T> DropFlavorWrapper<T> for T

§

type Flavor = MayDrop

The DropFlavor that [wrap]s T into Self
Source§

impl<T> ExpectInto for T

Source§

fn expect_into<Dst: TryFrom<Self>>(self) -> Dst
where Self: Sized,

Converts the value into Dst and returns the successful result. Read more
Source§

impl<T> Expected for T

Source§

fn expected_add(self, rhs: Self) -> Self
where Self: CheckedAdd + Sized,

Adds rhs with an expectation that the operation is valid. Read more
Source§

fn expected_sub(self, rhs: Self) -> Self
where Self: CheckedSub + Sized,

Subtracts rhs with an expectation that the operation is valid. Read more
Source§

fn expected_mul(self, rhs: Self) -> Self
where Self: CheckedMul + Sized,

Multiplies by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_div(self, rhs: Self) -> Self
where Self: CheckedDiv + Sized,

Divides by rhs with an expectation that the operation is valid. Read more
Source§

fn expected_rem(self, rhs: Self) -> Self
where Self: CheckedRem + Sized,

Computes the remainder with an expectation that the operation is valid. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T, W> HasTypeWitness<W> for T
where W: MakeTypeWitness<Arg = T>, T: ?Sized,

§

const WITNESS: W = W::MAKE

A constant of the type witness
§

impl<T> Identity for T
where T: ?Sized,

§

const TYPE_EQ: TypeEq<T, <T as Identity>::Type> = TypeEq::NEW

Proof that Self is the same type as Self::Type, provides methods for casting between Self and Self::Type.
§

type Type = T

The same type as Self, used to emulate type equality bounds (T == U) with associated type equality constraints (T: Identity<Type = U>).
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> JsonCastable<CanonicalJsonValue> for T

§

impl<T> JsonCastable<Value> for T

§

impl<T> Paint for T
where T: ?Sized,

§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling [Attribute] value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi [Quirk] value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1:

renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the [Condition] value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new [Painted] with a default [Style]. Read more
§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> ServiceExt for T

§

fn add_extension<T>(self, value: T) -> AddExtension<Self, T>
where Self: Sized,

Add some shareable value to request extensions. Read more
§

fn compression(self) -> Compression<Self>
where Self: Sized,

Compresses response bodies. Read more
§

fn decompression(self) -> Decompression<Self>
where Self: Sized,

Decompress response bodies. Read more
§

fn trace_for_http(self) -> Trace<Self, SharedClassifier<ServerErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using HTTP status codes. Read more
§

fn trace_for_grpc(self) -> Trace<Self, SharedClassifier<GrpcErrorsAsFailures>>
where Self: Sized,

High level tracing that classifies responses using gRPC headers. Read more
§

fn follow_redirects(self) -> FollowRedirect<Self>
where Self: Sized,

Follow redirect resposes using the Standard policy. Read more
§

fn sensitive_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<SetSensitiveResponseHeaders<Self>>
where Self: Sized,

Mark headers as sensitive on both requests and responses. Read more
§

fn sensitive_request_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveRequestHeaders<Self>
where Self: Sized,

Mark headers as sensitive on requests. Read more
§

fn sensitive_response_headers( self, headers: impl IntoIterator<Item = HeaderName>, ) -> SetSensitiveResponseHeaders<Self>
where Self: Sized,

Mark headers as sensitive on responses. Read more
§

fn override_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request. Read more
§

fn append_request_header<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Append a header into the request. Read more
§

fn insert_request_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetRequestHeader<Self, M>
where Self: Sized,

Insert a header into the request, if the header is not already present. Read more
§

fn override_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response. Read more
§

fn append_response_header<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Append a header into the response. Read more
§

fn insert_response_header_if_not_present<M>( self, header_name: HeaderName, make: M, ) -> SetResponseHeader<Self, M>
where Self: Sized,

Insert a header into the response, if the header is not already present. Read more
§

fn catch_panic(self) -> CatchPanic<Self, DefaultResponseForPanic>
where Self: Sized,

Catch panics and convert them into 500 Internal Server responses. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T> Tried for T

Source§

fn try_add(self, rhs: Self) -> Result<Self>
where Self: CheckedAdd + Sized,

Adds rhs with checked arithmetic. Read more
Source§

fn try_sub(self, rhs: Self) -> Result<Self>
where Self: CheckedSub + Sized,

Subtracts rhs with checked arithmetic. Read more
Source§

fn try_mul(self, rhs: Self) -> Result<Self>
where Self: CheckedMul + Sized,

Multiplies by rhs with checked arithmetic. Read more
Source§

fn try_div(self, rhs: Self) -> Result<Self>
where Self: CheckedDiv + Sized,

Divides by rhs with checked arithmetic. Read more
Source§

fn try_rem(self, rhs: Self) -> Result<Self>
where Self: CheckedRem + Sized,

Computes the remainder by rhs with checked arithmetic. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more